Copyright © 2018 NEWANGIE All rights reserved.
 |
BM15
Bomeitong
| Quantity: | |
|---|---|
1. Technology: laser hair removal device
2. Wavelength: 808nm, 755nm, 1064nm available
3. Features: Suitable for all hair and skin colors
4. Energy: 1-120J/cm2
5. Pulse time: 1-400ms(adjustable)
6. Frequency: 1-10 Hz
7. Spot size(mm): 12*12, 12*16, 12*21 choicable
8. Cooling system: TEC + Heat sink
Treatment Features
1. Sapphire crystal, no pain, no damage to the skin
2. Ergonomic design, easy to hold and operate, not tired for a long time, easy to operate
Technique Features
Long lifetime guarantee for laser bar
1. Water temperature guarantee: 15-30 degrees;
2. Two filters: ion filter and resin filter to ensure no cation generation in the entire water circulation;
3. Water flow detection system: the water flow rate is guaranteed to be 3.0-4.5 liters;
4. Strict parts quality inspection system: the target strip luminescence detection, uniformity, to ensure the treatment effect
Strict Quality inspection Process
All product inspection processes exceed 93 processes
Fast After-sales service
Photo communication no more than 2 times
Solve the problem no more than 48 hours
Laser Hair Removal Device Working Theory
Laser hair removal device is based on selective solar-thermal dynamics, through adjusting the wavelength, energy and pulse width of the laser through the skin to the hair root hair follicles, the heat energy is absorbed and break down the follicle tissue, making hair regeneration.The system of quick freezing point hair removal apply for refrigeration protection,It can make the temperature up to -5℃,It solves a lot difficulties.At the same time , it is safe, quick and permanent technology.
●Intelligent human-computer interface
Parameter storage function
Intelligent matching of energy and pulse width and luminous frequency (energy corresponds to reasonable pulse width and luminous frequency) real-time display of cooling water temperature to monitor cooling water flow in real time
●Multiple design protection
Water flow alarm: when the water flow is lower than
At 0.8L/min, the software will issue a prompt to ensure that the risk of burning the handle laser and poor cooling will burn the customer.
●Water temperature alarm:
When the water temperature exceeds 16 degrees -33 degrees, the software will give a prompt to stop the illumination and ensure the life of the handle laser.
Technique Features:
1. Ion filter (international standard)
Ensure that the water is clean and the target is safe. The strict water filtration system can effectively filter the water>5μm impurities; prevent water blockage, affect heat dissipation and burn the target.
2. DC diaphragm pump (German brand)
Germany imported pumps with low noise, stable water flow, can maintain 4.5-5Lmin for a long time, long working life, and can work continuously for more than 3,000 hours.
3. EC radiator is also called condenser (imported from Japan)
Using the international standard SUS316 stainless steel, it is currently the best refrigeration system for laser hair removal equipment in China. The handle crystal can freeze in 30 seconds, and it can make the machine work continuously for 24 hours.
4. Copper heat sink
Long-term work, to ensure clean water, our company's heat dissipation row is thicker copper heat sink, cooling speed, good cooling effect, is the best of all types of heat sink. Palladium strips have very high water quality requirements. The copper heat sinks the stainless steel water channel, which is resistant to high temperature and corrosion. It can keep the water clean for a long time.
1. Technology: laser hair removal device
2. Wavelength: 808nm, 755nm, 1064nm available
3. Features: Suitable for all hair and skin colors
4. Energy: 1-120J/cm2
5. Pulse time: 1-400ms(adjustable)
6. Frequency: 1-10 Hz
7. Spot size(mm): 12*12, 12*16, 12*21 choicable
8. Cooling system: TEC + Heat sink
Treatment Features
1. Sapphire crystal, no pain, no damage to the skin
2. Ergonomic design, easy to hold and operate, not tired for a long time, easy to operate
Technique Features
Long lifetime guarantee for laser bar
1. Water temperature guarantee: 15-30 degrees;
2. Two filters: ion filter and resin filter to ensure no cation generation in the entire water circulation;
3. Water flow detection system: the water flow rate is guaranteed to be 3.0-4.5 liters;
4. Strict parts quality inspection system: the target strip luminescence detection, uniformity, to ensure the treatment effect
Strict Quality inspection Process
All product inspection processes exceed 93 processes
Fast After-sales service
Photo communication no more than 2 times
Solve the problem no more than 48 hours
Laser Hair Removal Device Working Theory
Laser hair removal device is based on selective solar-thermal dynamics, through adjusting the wavelength, energy and pulse width of the laser through the skin to the hair root hair follicles, the heat energy is absorbed and break down the follicle tissue, making hair regeneration.The system of quick freezing point hair removal apply for refrigeration protection,It can make the temperature up to -5℃,It solves a lot difficulties.At the same time , it is safe, quick and permanent technology.
●Intelligent human-computer interface
Parameter storage function
Intelligent matching of energy and pulse width and luminous frequency (energy corresponds to reasonable pulse width and luminous frequency) real-time display of cooling water temperature to monitor cooling water flow in real time
●Multiple design protection
Water flow alarm: when the water flow is lower than
At 0.8L/min, the software will issue a prompt to ensure that the risk of burning the handle laser and poor cooling will burn the customer.
●Water temperature alarm:
When the water temperature exceeds 16 degrees -33 degrees, the software will give a prompt to stop the illumination and ensure the life of the handle laser.
Technique Features:
1. Ion filter (international standard)
Ensure that the water is clean and the target is safe. The strict water filtration system can effectively filter the water>5μm impurities; prevent water blockage, affect heat dissipation and burn the target.
2. DC diaphragm pump (German brand)
Germany imported pumps with low noise, stable water flow, can maintain 4.5-5Lmin for a long time, long working life, and can work continuously for more than 3,000 hours.
3. EC radiator is also called condenser (imported from Japan)
Using the international standard SUS316 stainless steel, it is currently the best refrigeration system for laser hair removal equipment in China. The handle crystal can freeze in 30 seconds, and it can make the machine work continuously for 24 hours.
4. Copper heat sink
Long-term work, to ensure clean water, our company's heat dissipation row is thicker copper heat sink, cooling speed, good cooling effect, is the best of all types of heat sink. Palladium strips have very high water quality requirements. The copper heat sinks the stainless steel water channel, which is resistant to high temperature and corrosion. It can keep the water clean for a long time.